Features - Remove pinstriping, decals, glue, stickers, tapes, and other adhesives from metal, glass, wood, fiberglass - Won't damage the surface if properly used. Keep in mind that too much pressure in the same area could cause the rubber wheel to damage or stain that area. Please use appropriate pressure - Simply mount the eraser in any drill that does not exceed 4,000 RPM (recommended speed is 3,500 to 4,000 rpm.) and safely remove all the old body striping in minutes. Unlike chemicals and solvents commonly used for this job, the soft wheel is gentle to the finish. Not recommended for acrylic, lacquer or Plexiglas. - Dramatically reduces time spent on removal of pinstripes, decal adhesive and double face tape!
Specifications 2.Name: Rubber Eraser Wheel 3.Size: 3.5 inches 4.Application: Quickly remove residual glue such as stickers and labels
USAGE NOTE As stated above, the RPM of the drill you are putting the eraser wheel in should not exceed the limit indicated on the wheel (4,000 RPM). If you exceed the 4,000 RPM limit, it could cause the eraser wheel to break down quicker or break apart. Safety goggles are recommended As with any type of product like this, it is recommended that you test a small area before doing the entire area to make sure it will work as expected. Especially on older, light colored finishes.